LC895994 Datasheet, PDF (2/7 Pages) Sanyo Semicon Device – CD-R Encoder/Decoder LSI with Built-in ATAPI (IDE) Interface

LC895994
Specifications
Maximum Ratings at Ta = 25°C, V_SS = 0 V
Parameter
Maximum supply voltage
I/O voltage
Allowable power dissipation
Operating temperature
Storage temperature
Solder resistance (Pins only)
Symbol
V_DD max
V_I, V_O
Pd max
Topr
Tstg
Ta ≤ 70°C
10 seconds
Conditions
Ratings
Unit
–0.3 to +7.0
V
–0.3 to V_DD + 0.3
V
600
mW
–30 to +70
°C
–55 to +125
°C
260
°C
Allowable Operating Range at Ta = –30 to +70°C, V_SS = 0 V
Parameter
Supply voltage
Input voltage range
Symbol
V_DD
V_IN
Conditions
min
4.5
0
Ratings
typ
5.0
Unit
max
5.5
V
V_DD
V
DC Characteristics at Ta = –30 to +70°C, V_SS = 0 V, V_DD = 4.5 to 5.5 V
Parameter
Input high-level voltage
Input low-level voltage
Symbol
Conditions
V_IH
TTL levels, for pin types 1 and 7
V_IL
min
2.2
Ratings
typ
Unit
max
V
0.8
V
Input high-level voltage
Input low-level voltage
V_IH TTL levels, for pin types 8 and 9, with pull-up
2.2
resistors
V_IL
V
0.8
V
Input high-level voltage
Input low-level voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output low-level voltage
Input leakage current
Output leakage current
Pull-up resistance
V_IH TTL levels, for pin types 2 and 10, with
Schmitt inputs
V_IL
V_OH I_OH = –2 mA, for pin type 6
V_OL I_OL = 2 mA, for pin type 6
V_OH I_OH = –24 mA, for pin type 3
V_OL I_OL = 24 mA, for pin type 3
V_OH I_OH = –2 mA, for pin types 4, 7, and 8
V_OL I_OL = 2 mA, for pin types 4, 7, and 8
V_OH I_OH = –24 mA, for pin types 5 and 10
V_OL I_OL = 24 mA, for pin types 5 and 10
V_OL I_OL = 2 mA, for pin type 9.
I_IL
V_I = V_SS, V_DD, for pin types 1, 2, 7, and 10
When set to high-impedance output:
For pin types 4, 5, 7, and 10.
2.5
V_DD — 2.1
V_DD — 2.1
V_DD — 2.1
V_DD — 2.1
–10
–10
R_UP For pin types 8 and 9
40
80
V
0.6
V
V
0.4
V
V
0.4
V
V
0.4
V
V
0.4
V
0.4
V
+10
µA
+10
µA
160
kΩ
The pin types above refer to the following groups.
Input
(1) SUA0 to SUA7, TEST0 to TEST6, RESET
(2) BCK, BICLKIN, BIDATAI, C2PO, DA0 to DA2, LOCKIN, LRCK, PLLOUTIN, ROUGH, SBSO, SCOR, SDATA,
WFCK, CS, CS1FX, CS3FX, DIOR, DIOW, DMACK, HRST, RD, WR
Output
(3) EFM
(4) CLVMDP, CLVMDS, FSW
(5) DMARQ, HINTRQ, IORDY, IOCS16
(6) DATACKO, EFMG, EFMGATE0 to EFMGATE3, EXCK, LOCK, MCK, MON, PSUBSYNC, RA0 to RA9,
SUBSYNC, CAS0, CAS1, ERROR, EXTACK, FRCK, LWE, OE, RAS0, RAS1, UWE
Input
(7) ATIPSYNC, Reserve0 to Reserve5
(8) D0 to D7, IO0 to IO15
(9) INT0 to INT1, SWAIT
(10) DD0 to DD15, DASP, PDIAG
No. 5824-2/7