LC895926 Datasheet, PDF (2/7 Pages) Sanyo Semicon Device – CD-R Encoder/Decoder IC with Built-in SCSI Interface

LC895926
Specifications
Absdute Maximum Ratings at Ta = 25°C, V_SS = 0 V
Parameter
Maximum power supply voltage
I/O voltage
Allowable power dissipation
Operating temperature
Storage temperature
Solder resistance (Pins only)
Symbol
V_DD max
V_I, V_O
Pd max
Topr
Tstg
Ta ≤ 70°C
10 seconds
Conditions
Ratings
Unit
–0.3 to +7.0
V
–0.3 to V_DD+0.3
V
600
mW
–30 to +70
°C
–55 to +125
°C
260
°C
Allowable Operating Ranges at Ta = –30 to +70°C, V_SS = 0 V
Parameter
Power supply voltage
Input voltage range
Symbol
min
V_DD
3.0
V_IN
0
3.3V
typ
3.3
max
3.6
V_DD
5V
Unit
min
typ
max
4.5
5.0
5.5
V
0
V_DD
V
DC Characteristics at Ta = –30 to +70°C, V_SS = 0 V, V_DD = 4.5 to 5.5 V
Parameter
Symbol
Conditions
min
Input high level voltage
Input low level voltage
V_IH
TTL levels, for pins (1) and (6)
2.2
V_IL
Input high level voltage
Input low level voltage
Input high level voltage
Input low level voltage
Output high level voltage
Output low level voltage
V_IH
TTL levels, for pin (4), with pull-up resistors
2.2
V_IL
V_IH
TTL levels, for pins (0) and (7), with Schmitt inputs
2.5
V_IL
V_OH I_OH = –2 mA, for pin (3)
V_DD — 2.1
V_OL I_OL = 2 mA, for pin (3)
Output high level voltage
V_OH I_OH = –2 mA, for pins (2), (4), and (6)
V_DD — 2.1
Output low level voltage
V_OL
Output high level voltage
V_OH
Output low level voltage
V_OL
Output low level voltage
V_OL
Input leak current
I_IL
Pull-up resistance
R_UP
The pins above refer to the following groups.
I_OL = 2 mA, for pins (2), (4), and (6)
I_OH = –48 mA, for pin (7)
I_OL = 48 mA, for pin (7)
I_OL = 2 mA, for pin (5)
V_I = V_SS, V_DD, for pins (0), (1), (6), and (7)
For pins (4) and (5)
V_DD — 2.1
–10
40
Ratings
typ
80
Unit
max
V
0.8
V
V
0.8
V
V
0.6
V
V
0.4
V
V
0.4
V
V
0.4
V
0.4
V
+10
µA
160
kΩ
Input
(0) BCK, BICLKIN, BIDATAI, C2PO, LOCKIN, LRCK, PLLOUTIN, ROUGH, SBSO, SCOR, SDATA, WFCK, CS,
RD, WR
(1) SUA0 to SUA7, TEST0 to TEST6, RESET
Output
(2) CLV⁺, CLV^–, FSW
(3) EFM, EFMG, EFMGATE0 to EFMGATE3, EXCK, LOCK, MON, RA0 to RA9, SUBSYNC, CAS0 to CAS1, RAS0
to RAS1, LWE, UWE, OE
Input
(4) D0 to D7, IO0 to IO15
(5) INT0 to INT1, SWAIT
(6) ATIPSYNC, Reserve0 to Reserve7
(7) ACK, ATN, BSY, C/D, DB0 to DB7, DBP, I/O, MSG, REQ, RST, SEL
Note: The XTAL0, XTAL1, XTALCK0, and XTALCK1 pins are not included in these DC characteristic specifications.
No. 5829-2/7