LB11823M Datasheet, PDF (2/19 Pages) Sanyo Semicon Device – Direct PWM Drive Brushless Motor Predriver for OA Products

Continued from preceding page.
Parameter
Allowable power dissipation
Operating temperature
Storage temperature
LB11823M
Symbol
Pd max
Topr
Tstg
Independent IC
Conditions
Allowable Operating Range at Ta = 25°C
Parameter
Supply voltage range 1-1
Supply voltage range 1-2
Supply voltage range 2
Supply voltage range 3
Output curent
12V constant-voltage output current
5V constant-voltage output current
HP pin applied voltage
HP pin output current
FGS pin applied voltage
FGS pin output current
Symbol
V_CC1-1
V_CC1-2
V_CC2
V_CC3
I_O
I12REG
IREG
VHP
IHP
VFGS
IFGS
Conditions
V_CC1 pin
V_CC1 pin, with V_CC1-VREG short-circuited
V_CC2 pin
V_CC3 pin
Pins UL, VL, WL, UH, VH, WH
Ratings
Unit
0.9
W
–20 to +100
°C
–55 to +150
°C
Ratings
Unit
8 to 13.5
V
4.5 to 5.5
V
4.5 to V_CC1
V
13.5 to 19
V
30
mA
–50
mA
–20
mA
0 to 13.5
V
0 to 10
mA
0 to 13.5
V
0 to 7
mA
Electrical Characteristics at Ta = 25°C, V_CC1 = 12 V, V_CC2 = VREG
Parameter
Symbol
Conditions
min
Supply current 1
Supply current 2
Output block
I_CC1-1
I_CC1-2
Stop mode
Output voltage 1-1
Output voltage 1-2
Output voltage
Temperature coefficient 1-1
Temperature coefficient 1-2
Temperature coefficient 2
12 V Regulator-voltage output (12REG pin)
V_OUT1-1 Low level I_O = 400 µA
V_OUT1-2 Low level I_O = 10 mA
V_OUT2 High level I_O = –20 mA
∆V_OUT1-1 Design target value*, Low level I_O = 400 µA
∆V_OUT1-2 Design target value*, Low level I_O = 10 mA
∆V_OUT2 Design target value*, High level I_O = –20 mA
V_CC1 – 1.1
Output voltage
Voltage regulation
Load regulation
Temperature coefficient
V12REG V_CC3 = 15 V, I_O = –30 mA
∆12VREG1 V_CC3 = 13.5 to 19 V, I_O = –30 mA
∆12VREG2 I_O = –5 to –45 mA, V_CC3 = 15 V
∆12VREG3 Design target value*
11.7
5 V Regulator-voltage output (VREG pin)
Output voltage
VREG
4.7
Voltage regulation
Load regulation
Temperature coefficient
∆VREG1 V_CC1 = 8 to 13.5 V
∆VREG2 IO = –5 to –20 mA
∆VREG3 Design target value*
Note*: These items are design target values and are not tested.
Ratings
typ
15
3.5
Unit
max
21 mA
5 mA
0.1
0.8
V_CC1 – 0.9
0.2
–1.5
1.5
0.3
V
1.1
V
V
mV/°C
mV/°C
mV/°C
12.1
12.6
V
150
300 mV
100
200 mV
2
mV/°C
5.0
5.3
V
40
100 mV
5
30 mV
0
mV/°C
Continued on next page.
No. 7106-2/19