|
LC86E5632 Datasheet, PDF (18/21 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with the One-Time Programmable UVEPROM | |||
|
◁ |
LC86E5632
Table 1. Ceramic resonator oscillation recommended constant (main clock)
Oscillation type
Maker
Oscillator
C1
C2
Rf
Rd
12MHz ceramic resonator
Murata
CSA12.0MTZ
33pF
33pF OPEN 560â¦
oscillation
CSA12.0MTZ
39pF
30pF OPEN
0â¦
CST12.0MTW
on chip
OPEN 560â¦
3MHz ceramic resonator
Murata
CSA3.00MG040 100pF 100pF OPEN 1.5â¦
oscillation
CST3.00MGW040
on chip
OPEN 1.5â¦
* Both C1 and C2 must use K rank (±10%) and SL characteristics.
Table 2. Crystal oscillation recommended constant (sub clock)
Oscillation type
Maker
Oscillator
C3
C4
32.768kHz crystal oscillation
Kyocera
KF-38G-13P0200
18pF
18pF
Seiko Epson MC-306,C-002RX,32.768kHz 4pF
4pF
* Both C3 and C4 must use J rank (±5%) and CH characteristics.
(It is about the application which is not in need of high precision. Use K rank (±10%) and SL characteristics.)
(Notes) â¢Since the circuit pattern affects the oscillation frequency, place the oscillation-related parts as close
to the oscillation pins as possible with the shortest possible pattern length.
CF1
CF2
Rf
Rd
C1
CF
C2
Figure 1 Main-clock circuit
Ceramic oscillation circuit
XT1
XT2
Xâtal
C3
C4
Figure 2 Sub-clock circuit
Crystal oscillation
No.6744-18/21
|
▷ |