LC863264C Datasheet, PDF (15/21 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

LC863264C/56C/48C/40C/32C/28C/24C/20C/16C
Sample Current Dissipation Characteristics / Ta= -10°C to +70°C, VSS=0V
The sample current dissipation characteristics is the measurement result of Sanyo provided evaluation board when the
recommended circuit parameters shown in the sample oscillation circuit characteristics are used externally. The
currents through the output transistors and the pull-up MOS transistors are ignored.
Parameter
Symbol
Pins
Conditions
VDD[V]
Ratings
unit
min
typ
max
Current dissipation
during basic
operation
(Note 4)
IDDOP(1)
VDD
•FmX’tal=32.768kHz
X’tal oscillation
•System clock : VCO
•VCO for OSD operating
•Internal RC oscillation stops
4.5 to 5.5
10
24 mA
Current dissipation
in HALT mode
IDDHALT(1)
VDD
•HALT mode
•FmX’tal=32.768kHz
(Note 4)
X’tal oscillation
•System clock : VCO
•VCO for OSD stops
4.5 to 5.5
3
9 mA
•Internal RC oscillation stops
IDDHALT(2)
VDD
IDDHALT(3)
VDD
•HALT mode
•FmX’tal=32.768kHz
X’tal oscillation
•VCO for system stops
•VCO for OSD stops
•System clock : Internal RC
•HALT mode
•FmX’tal=32.768kHz
4.5 to 5.5
300 1000
µA
X’tal oscillation
•VCO for system stops
•VCO for OSD stops
4.5 to 5.5
45
200
•System clock : X’tal
Current dissipation
in HOLD mode
(Note 4)
IDDHOLD
VDD
•HOLD mode
•All oscillation stops.
4.5 to 5.5
0.05
20 µA
Note 4: The currents through the output transistors and the pull-up MOS transistors are ignored.
No.A0115-15/21