LC86P6449 Datasheet, PDF (14/22 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller with One-Time Programmable PROM

LC86P6449
Parameter
Output off-
leakage current
Symbol
Pins
IOFF(1) •S0/T0 to S6/T6
•S28 to S37
(without pull-down
IOFF(2) resistor)
‘L’ level hold Tr.
of high voltage
withstand input
pull-down
transistor resistor
Rinpd
Rpd
Hysteresis
voltage
VHIS
Pin capacitance CP
S16 to S37
•S7/T7 to S15/T15
•S16 to S27
(without pull-down
resistor)
•Port 1
•Ports 70,71,72,73
• RES
All pins
Conditions
•Output P-channel
Tr. OFF
•VOUT=VSS
•Output P-channel
Tr. OFF
•VOUT=VDD-40V
Output P-channel
Tr. OFF
•Output P-channel
Tr. OFF
•VOUT=3V
•Vp=-30V
Output disable
VDD[V]
4.5 to 6.0
Ratings
min. typ.
-1
max. ^unit
µA
4.5 to 6.0 -30
4.5 to 6.0
400
kΩ
5.0
60
100 200 kΩ
4.5 to 6.0
0.1VDD
V
•f=1MHz
•VIN=VSS for all
unmeasured terminals.
•Ta=25°C
4.5 to 6.0
10
pF
4. Serial Input/output Characteristics at Ta=-30°C to +70°C, VSS1=VSS2=0V
Parameter
Cycle
Low Level
pulse width
High Level
pulse width
Cycle
Low Level
pulse width
High Level
pulse width
Data set-up time
Data hold time
Output delay time
(External clock
using for serial
transfer clock)
Output delay time
(Internal clock
using for serial
transfer clock)
Symbol
Pins
Conditions
tCKCY(1) SCK0,SCK1 Refer to figure 5
tCKL(1)
VDD[V] min.
4.5 to 6.0 2
1
Ratings
typ.
max.
unit
tCYC
tCKH(1)
1
tCKCY(2) SCK0,SCK1 •Use pull-up
4.5 to 6.0 2
tCKL(2)
resistor (1kΩ)
1/2tCKCY
in the open drain
tCKH(2)
output.
•Refer to figure 5
1/2tCKCY
tICK
•SI0,SI1
•Data set-up to
4.5 to 6.0 0.1
µs
•SB0,SB1
SCK0,1
•Data hold from
tCKI
SCK0,1
0.1
•Refer to figure 5
tCKO(1) •SO0,SO1 •Use pull-up
4.5 to 6.0
7/12
•SB0,SB1
resistor (1kΩ) in
the open drain
tCYC
+0.2
output.
tCKO(2)
•Data hold from
1/3
SCK0,1
tCYC
•Refer to figure 5
+0.2
No.6689-14/22