LE24CBK22 Datasheet, PDF (13/20 Pages) Sanyo Semicon Device – Two Wire Serial Interface EEPROM (2K+2K EEPROM)

LE24CBK22
8-3. Sequential read
In this mode, the data is read continuously, and sequential read operations can be performed with both current address
read and random read. If, after the 8-bit data has been output, acknowledge “0” is input and reading is continued
without issuing the stop condition, the address is incremented, and the data of the next address is output.
If acknowledge “0” continues to be input after the data has been output in this way, the data is successively output
while the address is incremented. When the last address is reached, it is rolled over to address 0, and the data
continues to be read. As with current address read and random read, the operation is completed by inputting the stop
condition without sending an acknowledge signal.
SDA
Device Address
Data (n)
Data (n+1)
Data (n+x)
1
0
1
0
S2
S1
S0/
A8
R
D7 D6 - D1 D0
ACK
R/W
D7 D6 - D1 D0
ACK
D7 D6 - D1 D0
ACK
NO ACK
In bank mode: S2, S1, and S0 are valid.
In combined mode: A8 is valid. S2 and S1 are don’t care.
Access from maste
No.1514-13/20