LV8104V Datasheet, PDF (10/19 Pages) Sanyo Semicon Device – For Variable Speed Control Three-Phase Brushless Motor Predriver

LV8104V
Pin Functions
Pin No. Pin name
Pin function
1
VREG 5V constant voltage output pin(5.6V).
Connect a capacitor between this pin and GND.
VCC
Equivalent circuit
1
2
GND2 GND pins.
3
GND1 GND1 and GND2 are connected in the IC.
4
C
VCO oscillation pin.
Connect a capacitor between this pin and GND.
VREG
5
R
Pin to set the charge / discharge current of the VCO
VREG
circuit.
Connect a resistor between this pin and GND.
6
FIL
VCO PLL output filter pin.
VREG
6
4
5
Continued on next page.
No.A1677-10/19