STK760-221A-E Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – Thick-Film Hybrid IC Single-phase Rectification PFC Hybrid IC

Ordering number : EN*A1052
STK760-221A-E
Thick-Film Hybrid IC
Single-phase Rectification
PFC Hybrid IC
Overview
The STK760-221A-E is an average current control type hybrid IC that integrates in a single package the power stages for
the step-up active converter and the control IC, and overcurrent/overvoltage protection circuits. It is designed to improve
the power factor of single-phase AC power supplies.
Applications
• Power rectification for air conditioners and general-purpose inverters as a single-phase rectification active converter.
Features
• IGBT switching power device employed in the active converter output stage.
• On-chip regulator for PFC control supports a wide range of input voltage (up to 50V).
• Full complement of protection circuits, including overcurrent, overvoltage, and undervoltage protection, plus soft start
function.
• Logic level PFC controlled ON/OFF control.
• On-chip light-load correction circuit that minimizes output voltage increase when no load is applied.
• SIP package providing a high degree freedom for mounting the IC in the set.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
61808HKIM No. A1052-1/9