STK672-210-E Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – Thick-Film Hybrid IC Unipolar Constant-Current Chopper Two-Phase Stepping Motor Driver Output Current 1.4A

Ordering number : EN7464A
STK672-210-E
Thick-Film Hybrid IC
Unipolar Constant-Current Chopper
Two-Phase Stepping Motor Driver
Output Current 1.4A
Overview
The STK672-210-E is two-phase stepping motor driver hybrid IC (HIC) that features further miniaturization and improved
input logic flexibility as compared to the STK6712 series products.
Applications
• The STK672-210-E is optimal for use as a stepping motor driver in printers, copiers, XY plotters, and similar equipment.
Features
• Built-in common-mode input protection circuit.
• The input signal logic lines are provided as active-high and active-low pairs, and thus support switching the motor wiring.
• Built-in current detection resistor for reduced external component mounting area on the printed circuit board.
• Wide motor operating range (10 to 45V)
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
71608HKIM/61504TN (OT) No. 7464-1/10