|
STK672-050 Datasheet, PDF (1/11 Pages) Sanyo Semicon Device – Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 3.0A) | |||
|
Ordering number: EN 5228A
Thick Film Hybrid IC
STK672-050
Microstep Operation-Supported
4-Phase Stepping Motor Driver (IO = 3.0A)
Overview
Package Dimensions
The STK672-050 is a unipolar constant-current chopper-
type externally-excited 4-phase stepping motor driver
hybrid IC which uses MOSFET power devices. It has a
microstep operation-supported 4-phase distributed con-
troller built-in to realize a high torque, low vibration, low
noise stepping motor driver using a simple control circuit.
unit: mm
4164
[STK672-050]
Applications
⢠Printer, copier, and X-Y plotter stepping motor drivers
Features
⢠Microstep sine-wave driver operation using only an
external clock input (0.2⦠current detection resistor
built-in)
⢠Microstep drive using only an external reference voltage
setting resistor
⢠2, 1-2, W1-2, 2W1-2, 4W1-2 phase excitation selectable
using external pins
⢠Selectable vector locus (perfect circle mode, inside 1
mode, outside 2 modes) to match motor characteristics
in microstep drive state
⢠Phase hold function during excitation switching
⢠Schmitt trigger inputs with built-in pull-up resistor
(20kâ¦)
⢠Monitor output pin enabling real-time conï¬rmation of
IC excitation
⢠The CLK and RETURN inputs provide an internal
noise elimination circuit as well as CMOS Schmitt cir-
cuit to prevent malfunction due to impulse noise.
⢠4-phase distribution switch timing selected externally to
either CLK rising-edge only detection mode or both ris-
ing-edge and falling-edge detection mode
⢠ENABLE pin for excitation current cutoff, thereby
reducing system current drain when driver is stopped
Series Organization
The following devices form a series with differing output
capacity.
Type No.
STK672-040
STK672-050
Output current (A)
1.5
3.0
SANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
N2997HA(ID) / 11896HA(ID) No. 5228â1/11
|
▷ |