STK621-033N-E Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – 3-phase Inverter Motor Drive Inverter Hybrid IC

Ordering number : ENA2127
STK621-033N-E
Thick-Film Hybrid IC
3-phase Inverter Motor Drive
Inverter Hybrid IC
Overview
This IC is a 3-phase inverter power hybrid IC containing power elements (IGBT and FRD), pre-driver, as well as
protection circuit in one package.
Application
• 3-phase inverter motor drive
Features
• Integrates power elements (IGBT and FRD), pre-driver, and protective circuit.
• Protective circuits including overcurrent (bus line), pre-drive low voltage protection are built in.
• Direct input of CMOS level control signals without an insulating circuit (photocoupler, etc) is possible.
• Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for
the upper and lower side transistors.
(Dead time is required for preventing shorting due to switching delay.)
• The level of the overcurrent protection current is programmable with the external resistance RSD between the ISD and
VSS terminals. (It is necessary to connect RSD to ensure normal operation of the overcurrent protection function.
ISD = 21A to 28A when RSD = 0Ω)
• SIP (The single in-line package) of the transfer full mold structure.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O0312HKPC 013-11-0009 No.A2127-1/8