STK401-020 Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – AF Power Amplifier (Split Power Supply) (15 W + 15 W min, THD = 0.4%)

Ordering number : EN4341A
Thick-Film Hybrid IC
STK401-020
AF Power Amplifier (Split Power Supply)
(15 W + 15 W min, THD = 0.4%)
Overview
Now, thick-film audio power amplifier ICs are available
with pin-compatibility to permit a single PCB to be
designed and amplifier output capacity changed simply by
installing a hybrid IC. This new series was developed
with this kind of pin-compatibility to ensure integration
between systems everywhere. With this new series of IC,
even changes from 3-channel amplifier to 2-channel
amplifiers is possible using the same PCB. In addition,
this new series of ICs has a 6/3Ω drive in order to support
the low impedance of modern speakers.
Features
• Pin-compatible
STK400-000 series (3-channel/single package)
Package Dimensions
unit: mm
4134
[STK401-020]
STK401-000 series (2-channel/single package)
• Output load impedance RL=6Ω/3Ω supported
• New pin arrangement
To simplify input/output pattern layout and minimize
the effects of pattern layout on operational
characteristics, pin assignments are grouped into blocks
consisting of input, output and power systems.
• Few external circuits
Compared to those series used until now, boot-strap
capacitors and boot-strap resistors for external circuits
can be greatly reduced.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Thermal resistance
Junction temperature
Operating substrate temperature
Storage temperature range
Permissible load short time
Symbol
V_CC max
θj-c
Tj
Tc
Tstg
t_s
Conditions
Per power transistor
V_CC = ±20 V, R_L = 6 Ω, f = 50 Hz, P_o = 15 W
Ratings
±29
2.1
150
125
–30 to +125
1
Unit
V
°C/W
°C
°C
°C
s
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
N3096HA(OT)/31293YO 5-3211 No. 4341-1/9