SBS818 Datasheet, PDF (1/4 Pages) Sanyo Semicon Device – Low VF Schottky Barrier Diode 30V, 2.0A Rectifier

Ordering number : ENA0471
SBS818
SANYO Semiconductors
DATA SHEET
SBS818
Low VF Schottky Barrier Diode
30V, 2.0A Rectifier
Applications
• _{High frequency rectification (switching regulators, converters, choppers).}
Features
• _{Small switching noise.}
• _{Low forward voltage (IF=2.0A, VF max=0.52V)}
• _{Ultrasmall package permitting applied sets to be small and slim (Mounting height 0.75mm).}
Specifications
Absolute Maximum Ratings at Ta=25°C (Value per element)
Parameter
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Surge Forward Current
Junction Temperature
Storage Temperature
Marking : SD
Symbol
VRRM
VRSM
IO
IFSM
Tj
Tstg
Conditions
When mounted on ceramic substrate
When mounted on glass epoxy substrate
50Hz sine wave, 1 cycle
Ratings
Unit
30
V
30
V
2.0
A
1.5
A
20
A
--55 to +125
°C
--55 to +125
°C
*: The absolute maximum ratings and electrical characteristics refer to those between Terminal 1 and Terminal 7 (or 8),
and between Terminal 3 andTerminal 5 (or 6).
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51408SB TI IM TC-00001363 No. A0471-1/4