SB05-05C Datasheet, PDF (1/3 Pages) Sanyo Semicon Device – 50V, 500mA Rectifier

Ordering number : ENA0409
SB05-05C
SANYO Semiconductors
DATA SHEET
SB05-05C ^{Schottky Barrier Diode}
50V, 500mA Rectifier
Applications
• _{High frequency rectification (switching regulators, converters, choppers).}
Features
• _{Low forward voltage (VF max=0.55V).}
• _{Fast reverse recorvery time (trr max=10ns).}
• _{Low switching noise.}
• _{Low leakage current and high reliability due to highly reliable planar structure.}
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Surge Forward Current
Junction Temperature
Storage Temperature
Symbol
VRRM
VRSM
IO
IFSM
Tj
Tstg
Conditions
50Hz sine wave, 1 cycle
Electrical Characteristics at Ta=25°C
Parameter
Reverse Voltage
Forward Voltage
Reverse Current
Interterminal Capacitance
Reverse Recovery Time
Thermal Resistance
Marking : B
Symbol
VR
VF
IR
C
trr
Rthj-a(1)
Rthj-a(2)
Conditions
IR=200µA, Tj=25°C
IF=500mA, Tj=25°C
VR=25V, Tj=25°C
VR=10V, f=1MHz
IF=IR=100mA, Tj=25°C, See specified Test Circuit.
Mounted in Cu-foiled area of 16mm²!0.2mm
on glass epoxy board
Ratings
Unit
50
V
55
V
500
mA
5
A
--55 to +125
°C
--55 to +125
°C
min
50
Ratings
typ
17
420
330
max
0.55
50
10
Unit
V
V
µA
pF
ns
°C / W
°C / W
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71206 / 42506SB MS IM TB-00000745 No. A0409-1/3