MCH6545 Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – Push-Pull Circuit Applications

Ordering number : EN8953
MCH6545
SANYO Semiconductors
DATA SHEET
MCH6545
PNP / NPN Epitaxial Planar Silicon Transistor
Push-Pull Circuit Applications
Applications
• _{MOSFET gate drivers, relay drivers, lamp drivers, motor drivers.}
Features
• Composite type with a PNP transistor and an NPN transistor contained in one package facilitating high-density mounting.
• Ultrasmall package allows applied sets to be made small and thin.
Specifications ( ) : PNP
Absolute Maximum Ratings at Ta=25°C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Total Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
PT
Tj
Tstg
Electrical Characteristics at Ta=25°C
Conditions
Mounted on a ceramic board (600mm²!0.8m)
Mounted on a ceramic board (600mm²!0.8m)
Ratings
Unit
(--50)60
V
(--)50
V
(--)5
V
(--)500
mA
(--)1.0
A
0.5
W
0.55
W
150
°C
--55 to +150
°C
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Marking : ET
Symbol
Conditions
ICBO
IEBO
hFE
fT
Cob
VCE(sat)
VBE(sat)
V(BR)CBO
V(BR)CEO
V(BR)EBO
VCB=(--)40V, IE=0A
VEB=(--)4V, IC=0A
VCE=(--)2V, IC=(--)10mA
VCE=(--)10V, IC=(--)50mA
VCB=(--)10V, f=1MHz
IC=(--)100mA, IB=(--)10mA
IC=(--)100mA, IB=(--)10mA
IC=(--)10µA, IE=0A
IC=(--)1mA, RBE=∞
IE=(--)10µA, IC=0A
min
(200)300
(--50)60
(--)50
(--)5
Ratings
Unit
typ
max
(--)100
nA
(--)100
nA
(500)700
(690)500
MHz
(3.8)2.8
pF
(--60)50 (--120)100 mV
(--)0.9
(--)1.2
V
V
V
V
Continued on next page.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bhldttgp.,:/1/s-1e0m,i1coCnh.soamneyo, U.ceonmo/,eTna/intoe-tkwuo,rTkOKYO, 110-8534 JAPAN
72606 / 32406EA MS IM TB-00002174 No.8953-1/5