MCH5834 Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – MOSFET : N-Channel Silicon MOSFET SBD : Schottky Barrier Diode General-Purpose Switching Device Applications

Ordering number : ENA0558
MCH5834
SANYO Semiconductors
DATA SHEET
MCH5834
MOSFET : N-Channel Silicon MOSFET
SBD : Schottky Barrier Diode
General-Purpose Switching Device
Applications
Features
• _{Composite type with an N-channel silicon MOSFET (MCH3435) and a schottky barrier diode (SS0503SH)}
contained in one package facilitating high-density mounting.
[MOSFET]
• _{Low ON-resistance.}
• _{Ultrahigh-speed switching.}
• _{1.5V drive.}
[SBD]
• _{Short reverse recovery time.}
• _{Low forward voltage.}
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
[MOSFET]
Drain-to-Source Voltage
Gate-to-Source Voltage (*1)
Drain Current (DC)
Drain Current (Pulse)
Allowable Power Dissipation
Channel Temperature
VDSS
VGSS
ID
IDP
PD
Tch
PW≤10µs, duty cycle≤1%
Mounted on a ceramic board (900mm²!0.8mm) 1unit
30
V
10
V
0.7
A
2.8
A
0.6
W
150
°C
Storage Temperature
Tstg
--55 to +125
°C
[SBD]
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Surge Forward Current
Junction Temperature
VRRM
VRSM
IO
IFSM
Tj
50Hz sine wave, 1 cycle
30
V
30
V
0.5
A
5
A
--55 to +125
°C
Storage Temperature
Tstg
--55 to +125
°C
Marking : XY
(*1) : Note, when designing a circuit using this it has a gate (oxide film) protection diode connected only between its gate and source.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N0806PE SY IM TC-00000259 No. A0558-1/6