LV8771VH Datasheet, PDF (1/13 Pages) Sanyo Semicon Device – PWM Constant-Current Control Stepping Motor Driver

Ordering number : ENA2056
Bi-CMOS LSI
LV8771VH _{PWM Constant-Current Control}
Stepping Motor Driver
Overview
The LV8771VH is a PWM current control stepping motor driver. It is ideally suited for driving stepping motors used in
office equipment and amusement applications.
Features
• 1 channel PWM current control stepping motor driver.
• IO max = 1.5A
• Output on-resistance (High side : 0.6Ω ; Low side : 0.4Ω ; total : 1.0Ω ; Ta = 25°C, IO = 1.5A).
• Micro step mode can be set to full-step, half-step (full torque), half-step, and quarter-step mode.
• Built-in thermal shutdown circuit.
• No control power supply necessary.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Output peak current
Output current
Allowable power dissipation
VM max
IO peak
IO max
Pd max
t ≤ 10ms, ON-duty ≤ 20%
*
36
V
1.75
A
1.5
A
3.0
W
Logic input voltage
VREF input voltage
VIN max
VREF max
-0.3 to +6
V
-0.3 to +6
V
Operating temperature
Topr
-20 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified circuit board : 90.0mm×90.0mm×1.6mm, glass epoxy board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high
voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
52312 SY 20120215-S00005 No.A2056-1/13