LV8760T_11 Datasheet, PDF (1/11 Pages) Sanyo Semicon Device – Forward/Reverse H-bridge Driver

Ordering number : ENA1157B
Bi-CMOS LSI
LV8760T _{Forward/Reverse H-bridge Driver}
Overview
The LV8760T is an H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a
motor. The low on-resistance, zero standby current, highly efficnet IC is optimal for use in driving brushed DC motors for
office equipment.
Features
• Forward/reverse H-bridge motor driver: 1 channel
• Built-in current limiter circuit
• Built-in thermal protection circuit
• Built-in short-circuit protection function
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Supply voltage
Output peak current
Output continuous current
Logic input voltage
Allowable power dissipation
Symbol
VM max
VCC max
IO peak
IO max
VIN
Pd max
Conditions
tw ≤ 20ms, duty 5%
Mounted on a specified board. *
Operating temperature
Topr
Storage temperature
Tstg
* Specified circuit board : 90mm×90mm×1.6mm, glass epoxy 2-layer board (2S0P), with backside mounting.
Ratings
Unit
38
V
6
V
4
A
3
A
-0.3 to VCC+0.3
V
3.3
W
-20 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
82411 SY 20110808-S00001/22410 SY 20100222-S00002/42308 MS PC 20080319-S00001 No.A1157-1/11