LV8417CS Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – Forward/Reverse Motor Driver

Ordering number : ENA1996
LV8417CS
Bi-CMOS IC
Forward/Reverse Motor Driver
Overview
The LV8417CS is a 1-channel H bridge motor driver IC. The package size is extremely small with wafer level package
(WLP). Moreover, the on-resistance is low (upper and lower total 0.27Ω typ.).
The application voltage range is wide (2.0V to 10.5V).
The H bridge of this IC is P-N composition and thereby reduces the external parts without need of charge pump.
Therefore, LV8417CS realizes reduction of mounting area which enables lower cost and smaller application size.
Functions
• H-bridge 1-channel forward/reverse motor driver
• IO max=1.0A (t≤100ms 2.0A, t≤10ms 3.8A)
• BiCDMOS process
• Built-in low voltage reset and thermal shutdown circuit
• Output ON resistance (Upper and lower total 0.27Ω; Ts=25°C, IO=1.0A)
Specifications
Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Symbol
Conditions
Ratings
Unit
Power supply voltage (for load)
Power supply voltage (for control)
Output current
Output peak current
Input voltage
Allowable power dissipation
VM max
VCC max
IO max
IO peak1
IO peak2
VIN max
Pd max
t ≤ 100ms
t ≤ 10ms
Mounted on a specified board *
-0.5 to 12.6
V
-0.5 to 6.0
V
1.0
A
2.0
A
3.8
A
-0.5 to VCC+0.5
V
850
mW
Operating temperature
Topr
-20 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified board : 57mm × 57mm × 1.6mm, glass epoxy both side board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high
voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D0711 SY 20111012-S00003 No.A1996-1/5