LV8416CB Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – For DSC, and Cell Phone Camera Modules H-Bridge x 4-channel Motor Driver

Ordering number : ENA1819
LV8416CB
Bi-CMOS LSI
For DSC, and Cell Phone Camera Modules
H-Bridge × 4-channel Motor Driver
Overview
The LV8416CB is an H-bridge×4-channel motor driver IC and is able to control 4 modes of forward, reverse, brake and
standby.
This IC housed in a wafer level package (WLP) is optimum for use in a stepping motor driving system for DSC or a camera
module of cell phones.
Functions
• Saturation drive H-bridge: 4-channels
• Various protection circuits (thermal protection, low voltage malfunction protection)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Power supply voltage
Output peak current
Output continuous current
Allowable power dissipation
VCC max
IO peak
IO max
Pd max
Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20%
Channels 1 to 4
Mounted on a circuit board*
Operating temperature
Topr
Storage temperature
Tstg
z Specified circuit board : 60mm × 60mm × 1.7mm, glass epoxy two-layer board.
Ratings
Unit
6.0
V
600
mA
400
mA
1000 mW
-30 to +85
°C
-55 to +150
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Power supply voltage range
Logic input voltage range
Input frequency
VCC op
VIN
fIN
IN1 to 8
Ratings
Unit
2.5 to 5.5
V
0 to VCC+0.3
V
to 100 kHz
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
81110 SY 20100728-S00004 No.A1819-1/5