LV8415CB Datasheet, PDF (1/12 Pages) Sanyo Semicon Device – Blurring correction driver IC for DSC H bridge x 2ch driver

Ordering number : ENA1787A
LV8415CB
Bi-CMOS integrated circuit
Blurring correction driver IC for DSC
H bridge × 2ch driver
Overview
LV8415CB is blurring correction driver IC for DSC.
Functions
• Actuator driver (saturation drive H bridge) × 2ch
• Constant current hall bias circuit × 2ch
• With built-in for PWM signal generation logic circuit × 2ch
• 8bitDAC for hall amplifier offset adjustment × 2ch
• Two systems in power supply (VM: for actuator, VCC)
• With built-in low voltage malfunction prevention circuit
• Hall Amplifier × 2ch
• General-purpose amplifier × 2ch
• 8bitDAC for hall bias × 2ch
• Three line serial input
• With built-in thermal protection circuit
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage 1
Supply voltage 2
Output peak current
Output current
Hall bias current
Allowable power dissipation
VM max
VCC max
IO peak
IO max
IHB max
Pd max
OUT1 to 2 (t ≤ 10msec, duty ≤ 20%)
OUT1 to 2
On a specified board *
Operating temperature
Topr
Storage temperature
Tstg
* Specified board: 40.0mm×50.0mm×0.8mm, Four layers fiberglass epoxy circuit board.
Ratings
Unit
6
V
6
V
600
mA
350
mA
5
mA
1
W
-20 to +85
°C
-55 to +150
°C
Allowable Operating Ratings at Ta = 25°C
Parameter
Supply voltage range 1
Supply voltage range 2
Logic input voltage
Symbol
VM
VCC
VIN
Conditions
Ratings
Unit
2.7 to 5.5
V
2.7 to 5.5
V
0 to VCC+0.3
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D2210 SY/82510 SY 20100818-S00003 No.A1787-1/12