LV8413GP_11 Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – For DSC, and Cell Phone Camera Modules H-Bridge x 2-channel Motor Driver

Ordering number : ENA1341A
LV8413GP
Bi-CMOS LSI
For DSC, and Cell Phone Camera Modules
H-Bridge × 2-channel Motor Driver
Overview
The LV8413GP is an H-bridge × 2-channel motor driver IC and is able to control 4 modes of forward, reverse, brake, and
standby.
This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera module
of cell phones.
Features
• Saturation drive H-bridge : 2-channels
• Built-in thermal protection circuit
• Built-in low voltage malfunction prevention circuit
• Incorporates a transistor for driving photosensors
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Power supply voltage 1
VM max
Power supply voltage 2
Output peak current
Output continuous current 1
Output continuous current 2
Allowable power dissipation
VCC max
IO peak
IO max1
IO max2
Pd max
Outs 1 to 4, t ≤ 10msec, ON-duty ≤ 20%
Outs 1 to 4
PI
Mounted on a circuit board*
Operating temperature
Topr
Storage temperature
Tstg
* Specified circuit board : 50.0mm × 40.0mm × 0.8mm : glass epoxy four-layer board (2S2P)
Ratings
Unit
6
V
6
V
600
mA
400
mA
15
mA
0.7
W
-20 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
51111 SY/N1908 MS PC 20081016-S00007 No.A1341-1/7