LV8085CL Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – Bi-CMOS LSI Two-channel H-Bridge Driver

Ordering number : ENA0631A
Bi-CMOS LSI
LV8085CL ^{Two-channel H-Bridge Driver}
Overview
The LV8085CL is a two-channel H-bridge driver that supports low-voltage operation. It is optimal for H-bridge drive of
stepping motors (AF and zoom) in portable equipment such as camera cell phones.
Features
• Two-channel H-bridge driver
• Supports both 2-phase drive and 1-2 phase drive.
• Implemented in a low-power MOS IC process.
• Ultraminiature easy to solder ESCP2823-10 package
• Built-in thermal protection and low-voltage sensing circuits
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Output voltage
Input voltage
Ground pin source current
VCC max
VOUT max
VIN max
IGND
OUT1, OUT2, OUT3, OUT4
CONT, IN
Per channel
Allowable power dissipation
Pd max
Mounted on a circuit board.*
Operating temperature
Topr
Storage temperature
Tstg
* Specified circuit board : 20.0mm×10.0mm×0.8mm³, paper-phenol circuit board.
Ratings
Unit
6.5
V
6.5
V
-0.3 to +6.5
V
400
mA
400
mW
-30 to +85
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
60607 MS PC 20070529-S00002 / 31407 MS PC 20061016-S00006 No.A0631-1/5