LV8075LP_11 Datasheet, PDF (1/4 Pages) Sanyo Semicon Device – Constant-voltage Control 1-channel Forward/Reverse Motor Driver

Ordering number : ENA1133A
LV8075LP
Bi-CMOS LSI
Constant-voltage Control 1-channel
Forward/Reverse Motor Driver
Overview
LV8075LP is a constant voltage control 1-channel forward/reverse motor driver IC.
Features
• Constant voltage control forward/reverse H-bridge
Parallel input-Analog value must be entered for constant voltage reference input
V (OUT) = V (VC) × 2.0
• Built-in thermal protection circuit and under-voltage detection protection circuit
Specifications
Absolute Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Maximum control power supply voltage
Maximum load power supply voltage
Maximum control pin voltage
Maximum output current
VREF maximum current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VM max
VC max
IO max
IREF max
Pd max
Topr
Tstg
Conditions
OUT1, 2
VREF
Mounted on a circuit board*
* Specified circuit board : 40.0×50.0×0.8mm³ : glass epoxy four-layer board
Ratings
Unit
6
V
6
V
6
V
0.5
A
1
mA
700
mW
-30 to +85
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
21710 SY 20100210-S00003 / 51408 MS PC 20080408-S00008 No.A1133-1/4