LV8051PL Datasheet, PDF (1/14 Pages) Sanyo Semicon Device – Bi-CMOS IC For Digital Still Cameras 6-channel 1-chip Motor Driver IC

Ordering number : ENA0001A
Bi-CMOS IC
LV8051PL ^{For Digital Still Cameras}
6-channel 1-chip Motor Driver IC
Overview
The LV8051PL is a digital still camera motor driver that integrates six channels on a single-chip.
Features
• Five PWM drive forward/reverse motor driver channels
• One constant current forward/reverse motor driver channel
• The states of all drivers can be set up over 8-bit serial data transfer
• Ability to set the constant current reference voltage via serial data
Examples of Actuator Applications
Application 1
Application 2
Shutter
Constant current/VCM
Constant current/VCM
Iris
Saturated/VCM
Saturated/VCM
Focus
Saturated/STM
Saturated/STM
Zoom
Saturated/STM
Saturated/DCM
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage 1
VM max
Supply voltage 2
Output peak current
Output continuous current
Allowable power dissipation 1
VCC max
IO peak
IO max
Pd max1
1ch/2ch/3ch/4ch/5ch/6ch
Pulse width<10ms, Duty ≤20%
1ch/2ch/3ch/4ch/5ch/6ch
Independent IC
Allowable power dissipation 2
Pd max2
Mounted on a circuit board*
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a specified board: 40mm×50mm×0.8mm, glass epoxy four-layer board.
Ratings
Unit
6
V
6
V
600
mA
400
mA
0.2
W
1.0
W
-20 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
32207 MS IM B8-8858 No.A0001-1/14