LV8019LP_08 Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Forward/Reverse Motor Driver

Ordering number : ENA0792A
LV8019LP
Bi-CMOS IC
Forward/Reverse Motor Driver
Overview
The LV8019LP is a forward/reverse motor driver.
Features
• One H-bridge driver channel
• Provides a constant current output
• Built-in thermal shutdown circuit
Specifications
Maximum Ratings at Ta = 25°C and SGND = PGND = 0V
Parameter
Output block supply voltage
Control block supply voltage
Constant current output block
supply voltage
Maximum output current
Input signal voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VM max
VCC max
VRG max
IO max
IO peak1
IO peak2
VIN max
Pd max1
Pd max2
Topr
Tstg
Conditions
t ≤ 200ms, f = 2Hz
t ≤ 10ms, f = 2Hz
Independent IC
When mounted on a circuit board *1
* : Specified substrate : 40×50×0.8mm³, glass epoxy four-layer (2S2P) board
Ratings
Unit
-0.5 to 8.4
V
-0.5 to 7.0
V
-0.5 to 6.0
V
1.2
A
3
A
5
A
-0.5 to VCC+0.5
A
0.2
W
1.05
W
-30 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
22008 MS 20080204-S00007 / 41807 MS PC 20070406-S00004 No.A0792-1/6