LV8013T-A-TLM-E Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Forward/Reverse Motor Driver

Ordering number : ENA0907A
Bi-CMOS IC
LV8013T ^{Forward/Reverse Motor Driver}
Overview
LV8013T is a 1ch forward/reverse motor driver IC using D-MOS FET for output stage. As MOS circuit is used, it supports
the PWM input. Its features are that the on resistance (0.3Ω typ) and current dissipation are low.
It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the
motors that need high-current.
Functions
• 1ch forward/reverse motor driver
• Possible to respond to 3V control voltage and 6V motor voltage device
• Low power consumption
• Low-temperature resistance 0.5Ω
• Built-in charge pump circuit
• Built-in low voltage reset and thermal shutdown circuit
• Four mode function forward/reverse, brake, stop.
Specifications
Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Supply voltage (For load)
Symbol
VM max
Conditions
Supply voltage (For control)
Output current
Input voltage
Allowable power dissipation
VCC max
IO max
IO peak1
IO peak2
VIN max
Pd max
DC
t ≤ 100ms, f = 5Hz
t ≤ 10ms, f = 5Hz
Mounted on a specified board *
Operating temperature
Topr
Storage temperature
Tstg
*Specified board : 30mm × 50mm × 1.6mm, glass epoxy board.
Ratings
Unit
-0.5 to 16
V
-0.5 to 6.0
V
1.2
A
2.0
A
3.8
A
-0.5 to VCC+0.5
V
800
mW
-20 to +75
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
http://semicon.sanyo.com/en/network
N2608 MS / 80107 MS PC B8-9208 No.A0907-1/6