LV7109E Datasheet, PDF (1/24 Pages) Sanyo Semicon Device – AC Switch Europe SCART Standard

Ordering number : ENA1992
LV7109E
Bi-CMOS IC
AC Switch
Europe SCART Standard
Overview
The LV7109E is a rationalized IC of AC switch LV7108 complying with the Europe SCART standard.
Features and functions
• Video/Audio Canal-SW
• 6dB-VideoAmp
• 6MHz/12MHz/27MHz-LowPassFilter
• 9ch VideoDriver (AV1/AV2/Line/RGB/Component)
• V-Sync. Detection
• 3ch Stereo Audio Input
• 2ch Stereo Audio Output
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage 1
Maximum supply voltage 2
Recommended supply voltage 1
Recommended supply voltage 2
Operating supply range 1
Operating supply range 2
Allowable power dissipation
VCC1 max
VCC2 max
VCC1
VCC2
VCC1 opg
VCC2 opg
Pd max
* With specified substrate
Operating temperature
Topr
Storage temperature
Tstg
* With specified substrate : 76.1mm × 114.3mm × 1.6mm, glass epoxy.
Ratings
Unit
6.0
V
13.0
V
5.0
V
12.0
V
4.5 to 5.3
V
11.1 to 12.5
V
1070
mW
-20 to +75
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
N1611 SY PC 20110207-S00003 No.A1992-1/24