LV71081E Datasheet, PDF (1/31 Pages) Sanyo Semicon Device – For Video/Audio Signal Input/ Output Interface of DVD Recorder

Ordering number : ENA1610A
LV71081E
Bi-CMOS IC
For Video/Audio Signal Input/
Output Interface of DVD Recorder
Overview
The LV71081E is for video/audio signal input/output interface of DVD recorder.
Functions
• Video audio canal SW
• S signal 3 input switch
• 6dB amplifier
• 6MHz/12MHz/27MHz-LPF / 6MHz/12MHz/27MHz low pass filter
• 6ch video driver (AV1, AV2, Line output, R•G•B output)
• Video signal detection
• Composite sync output
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage 1
Maximum supply voltage 2
Allowable power dissipation
VCC max
VCC max
Pd max
Ta ≤ 75°C Mounted on a specified board *
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a specified board : 114.3mm × 76.1mm × 1.6mm, glass epoxy
Ratings
Unit
6.0
V
13.0
V
1200
mW
-20 to +75
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
92910 SY/D0909 SY PC 20091028-S00001 No.A1610-1/31