LV7107M Datasheet, PDF (1/35 Pages) Sanyo Semicon Device – Bi-CMOS IC For Video/Audio Signal Input/ Output Interface of DVD Recorder

Ordering number : ENA0913
Bi-CMOS IC
LV7107M ^{For Video/Audio Signal Input/}
Output Interface of DVD Recorder
Overview
The LV7107M is an IC which integrates on a single chip the analog video/audio signal input switch and video drivers.
The IC, which conforms to the Scart connector standard in Europe, is an interface optimal for use in DVD recorders
in Europe and DVD complex machines.
Functions
• Video audio canal SW
• S signal 3 input switch
• 6dB amplifier
• 6MHz/12MHz low pass filter
• 11-channel video driver (AV1, AV2, Line output, S output, R·G·B output, component output)
• Video signal detection
• Composite sync output
• Audio ALC
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage 1
Maximum supply voltage 2
Allowable power dissipation
VCC max
VCC max
Pd max
Ta≤75°C Mounted on a specified board *
Operating temperature
Topr
Storage temperature
Tstg
Note *: Mounted on a specified board: 114.3mm×76.1mm×1.6mm glass epoxy
Ratings
Unit
6.0
V
13.0
V
1200
mW
-20 to +75
°C
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
91207 TI IM 20051012-S00007 No.A0913-1/35