LV59001M Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – Output voltage changeable type Power Supply IC

Ordering number: ENA1973
LV59001M
Bi-CMOS LSI
Output voltage changeable type
Power Supply IC
Overview
The LV59001M is output good transformation power supply IC of low consumption current, and is effective as a
constant-voltage source of battery use apparatus.
Features
• Low current consumption
• With on-off switch
• Output voltage changeable type (VO: 0.8 to 3.5V)
• Output current of 1A obtainable
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum power supply
Allowable power dissipation
VIN1
VIN2
Pd max
Mounted on a specified board.*
Operating Temperature
Topr
Storage Temperature
Tstg
* Specified board: 50mm × 50mm × 1.6mm, glass epoxy both sides
Ratings
Unit
7
V
7
V
1.45
W
-30 to +85
°C
-40 to +125
°C
Recommended Operating Ranges at Ta = 25°C
Parameter
power supply
Output voltage setting range
Output current
Symbol
VIN1
VIN2
VO
IO
VIN1 pin
VIN2 pin
Conditions
min
1.6
1.8
0.8
0
Ratings
typ
Unit
max
6
V
6
V
3.5
V
1
A
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
92811 SY 20110628-S00001 No.A1973-1/7