LV5710V Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – Bi-CMOS LSI For camera sensor Power supply for charge pump

Ordering number : ENA1117
LV5710V
Bi-CMOS LSI
For camera sensor
Power supply for charge pump
Overview
The LV5710V is power supply for charge pump for camera sensor.
Functions
• Regulating the 5V input by boosting it three-fold with the charge pump to the specified voltage.
• Output voltage variable with external resistor.
• Soft start function incorporated, which reduces the rush current at start of charge pump.
• Timer-latch type short-circuit protective function incorporated.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VDD max
Pd max
Topr
Tstg
Conditions
with specified substrate *
* : Specified substrate : 114.3mm×76.1mm×1.6mm, glass epoxy board
Allowable Operating Ratings at Ta = 25°C
Parameter
Supply voltage
Input “H” voltage
Input “L” voltage
Symbol
VDD
VINH
VINL
EN pin
EN pin
Conditions
Ratings
Unit
6.0
V
0.55
W
-20 to +80
°C
-40 to +125
°C
min
4.5
1.5
-0.1
Ratings
typ
Unit
max
5.5
V
VDD
V
0.4
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
31908 MS PC 20080226-S00011 No.A1117-1/6