LV5696P Datasheet, PDF (1/14 Pages) Sanyo Semicon Device – For Car Audio Systems Multi-Power Supply IC

Ordering number : ENA2159
LV5696P
Bi-CMOS LSI
For Car Audio Systems
Multi-Power Supply IC
Overview
LV5696P is a multiple voltage regulator for car audio system. This IC has 6 system of voltage regulators,
3.3/5.0Voutput for a microcontroller, 8.0V output for CD driver, 3V-8V (Adjustable) output for illuminations, 8.5V
output for audio control, 5V output for SYS control, 3.3V output for DSP control and 1 high side switch output for
ANT output.
About protection circuits, it has Over-current-protection, Over-voltage-protection and Thermal-shut-down.
Features
• Low current consumption : typ 50μA
• 6 system of regulators
VDD (Micon) : VOUT 3.3/5.0V, IOUT MAX 200mA
CD
: VOUT 8.0V, IOUT MAX 1000mA
Illumination : VOUT 3.0V to 8.0V (Adjustable external resistors), IOUT MAX 200mA
Audio
: VOUT 8.5V, IOUT MAX 300mA
SYS
: VOUT 5.0V, IOUT MAX 500mA
DSP
: VOUT 3.3V, IOUT MAX 800mA
• 1 high-side switch coupled VCC
ANT
: IOUT MAX 200mA, VCC-VOUT = 0.5V
• Over current protection
• Over voltage protection typ 21V (All outputs except for VDD are turned off)
• Thermal shut down circuit typ 175°C
• Applied P-LDMOS to output stage
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under overcurrent protection range, thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D1212NKPC 20121105-S00005 No.A2159-1/14