LV5695P_12 Datasheet, PDF (1/13 Pages) Sanyo Semicon Device – For Car Audio Systems Multi-Power Supply System IC

Ordering number : ENA1972A
LV5695P
Monolithic Linear IC
For Car Audio Systems
Multi-Power Supply System IC
Overview
LV5695P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5
systems of voltage regulator pre-driver which two high side switch for external devices. The following protection circuits
are integrated: over current protector, overvoltage protector and Thermal Shut Down.
Features
• Quiescent current 50μA (Typ. when only VDD is in operation)
• Five channel regulator
For VDD: VOUT is 5.0V/3.3V(Operation always), IOmax is 300mA
For SWD5V: VOUT is 5.0V, IOmax is 500mA
For CD: VOUT is 8.0V, IOmax is 2000mA
For illumination: VOUT is 8.5V, IOmax is 500mA
For audio systems: VOUT is 8.45V, IOmax is 800mA
• Two high side switch:
AMP: Voltage difference between input and output is 0.5V, IOmax is 500mA
ANT: Voltage difference between input and output is 0.5V, IOmax is 350mA
• Over current protector
• Overvoltage protector (Without VDD-OUT) Clamp voltage is 28V (typical)
• Thermal Shut down 175ºC (typical)
• Pch-LDMOS is used for power output block.
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O2611 SY 20111018-S00003/82411 SY 20110718-S00006 No.A1972-1/13