LV5694P Datasheet, PDF (1/13 Pages) Sanyo Semicon Device – Monolithic Linear IC For Car Audio Systems Multi-Power Supply System IC

Ordering number : ENA2017
LV5694P
Monolithic Linear IC
For Car Audio Systems
Multi-Power Supply System IC
Overview
LV5694P is a power supply IC suitable for USB/CD receiver system for car audio system.This IC enables drastic reduction
of power dissipation compared to the existing model.This IC integrates 5 systems of regulator output, 2 systems of high
side power switch, overcurrent protector, overvoltage protector and overheat protector (the package is HZIP15J).
Features
• Low consumption current: 50µA (typ, only VDD output is in operation)
• 5 systems of regulator output
VDD for microcontroller: output voltage: 5.0V/3.3V (always ON), maximum output current: 300mA
For SWD5V: output voltage: 5V, maximum output current: 500mA
For CD: output voltage: 7.6V/8.1V, maximum output current: 2000mA
For illumination: output voltage: 9.0V, maximum output current: 500mA
For audio: output voltage: 8.45V, maximum output current: 800mA
• 2 lines of high side switch with interlock VCC
AMP: Maximum output current: 500mA, voltage difference between input and output: 0.5V
ANT: Maximum output current: 350mA, voltage difference between input and output: 0.5V
• Overcurrent protector
• Overvoltage protector: Typ 36V (All outputs are turned off)
• Overheat protector: Typ 175°C
• PchLDMOS is used in power output block
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
30712 SY 20120203-S00001No.A2017-1/13