LV5692P Datasheet, PDF (1/14 Pages) Sanyo Semicon Device – For Car Audio Systems Multi-Power Supply System IC

Ordering number : ENA1876B
LV5692P
Monolithic Linear IC
For Car Audio Systems
Multi-Power Supply System IC
Overview
LV5692P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5
systems of voltage regulator pre-driver for P-FET which generates USB power and a high side switch for external devices.
The following protection circuits are integrated: over current protector, overvoltage protector and Thermal Shut Down.
This IC is suitable for use in car audio with USB port.
Features
• Five channel regulator and one channel P-FET pre-driver (for USB-power)
For VDD: VOUT is 3.3V, IOmax is 300mA
For DSP: VOUT is 3.3V, IOmax is 300mA
For CD: VOUT is 8.0V, IOmax is 1300mA
For illumination: VOUT is 8.4V, IOmax is 500mA
For audio systems: VOUT is 8.4V, IOmax is 500mA
For USB (controller), VOUT is flexible (configurable with external resistor), IOmax is 1000mA
• High side switch: Voltage difference between input and output is 0.5V, IOmax is 500mA
• Over current protector
• Overvoltage protector (Without VDD-OUT) Clamp voltage is 21V (typical)
• Thermal Shut down 175ºC (typical)
• Quiescent current 50μA (Typ. when only VDD is in operation)
(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the
conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may
degrade the IC’s reliability and eventually damage the IC.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O2611 SY 20111018-S00001/D2210 SY 20101208-S00002/N2410 SY 20101102-S00003 No.A1876-1/14