LV5684PVD Datasheet, PDF (1/12 Pages) Sanyo Semicon Device – For Car Audio Systems Multi-Power Supply IC

Ordering number : ENA2141
LV5684PVD
Bi-CMOS LSI
For Car Audio Systems
Multi-Power Supply IC
Overview
The LV5684PVD is a power supply IC suitable for USB/CD receiver system for car audio system.
This IC integrates 5 systems of regulator output, 2 systems of high side power switch, overcurrent protector,
overvoltage protector and overheat protector
Supply for VDD and SW33V outputs is low voltage specification, which enables drastic reduction of power dissipation
compared to the existing model. (the package is HZIP15).
Features
• Low consumption current: 50μA (typ, only VDD output is in operation)
• 5 systems of regulator output
VDD for microcontroller: output voltage: 3.3V, maximum output current: 350mA reverse current protection
implemented.
For system: output voltage: 3.3V, maximum output current: 450mA
For audio: output voltage: 5 to 9V (set by external resistors), maximum output current: 250mA
For illumination: output voltage: 5 to 12V (set by external resistors), maximum output current: 300mA
For CD: output voltage: 5V/8V, maximum output current: 1300mA
• 2 lines of high side switch with interlock VCC
EXT: Maximum output current: 350mA, voltage difference between input and output: 0.5V
ANT: Maximum output current: 300mA, voltage difference between input and output: 0.5V
• Supply input
V6IN: 6V for VDD, system (SW33V)
VCC1: For internal reference voltage, control circuits
In case of voltage drop of V6IN, VCC1 supplies to VDD output.
VCC2: For AUDIO, illumination, CD, EXT/ANT
• Overcurrent protector
• Overvoltage protector(OVP): VCC1,VCC2 Typ 23V (All outputs except VDD are turned off)
Overvoltage shutdown(OVS): V6IN Typ 23V (All outputs except VDD are turned off)
• Overheat protector: Typ 175°C
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O1712NK 20120920-S00003 No.A2141-1/12