LV56831P_12 Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – For Car Audio Systems Multi Voltage Regulator IC

Ordering number : ENA1983B
LV56831P
Monolithic Linear IC
For Car Audio Systems
Multi Voltage Regulator IC
Overview
The LV56831P has 4 system regulator, VDD 5V(3.3V), AUDIO(8.5V), AMP remote(12V) and REG(3.3V/5V select).
About protection circuits, it has Over-current-protection, Over-voltage-protection and Thermal-shut-down. AMP remote
and REG supply is independent terminal from VCC.,
Features
• 4 system regulator
VDD(LCD micon) : VOUT 5.0V(3.3V), IO max 300mA, reverse current prevention.
Audio
: VOUT 8.5V, IO max 400mA
AMP remote
: VOUT 12V, IO max 500mA
REG3.3/5V
: VOUT 3.3V(5V), IO max 500mA
• Over-current-protection
• Over-voltage-protection: Typ 21V(except VDD)
• Thermal-shut-down Typ 175ºC
• Applied Pch-LDMOS for output stages.
(Warning)The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of safety
range or ratings. Use of the IC such as use under overcurrent protection range or thermal shut down state may degrade the IC’s reliability and eventually
damage the IC.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Conditions
Conditions
Supply voltage
Allowable Power dissipation
VCC max
Pd max
(*Ta ≤ 25°C)
IC unit
With Al heatsink(50×50×1.5mm³)
Infinite heat rediation
Peak supply voltage
Operating ambient temperature
VCC peak
Topr
See below pulse wave.
Storage temperature
Tstg
Junction temperature
Tj max
Ratings
Unit
36
V
1.3
W
5.3
W
26
W
50
V
-40 to +85
°C
-55 to +150
°C
150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
52312 SY/30712 SY/O2611 SY 20111014-S00007 No.A1983-1/9