LV5609LP Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – Bi-CMOS LSI For CCD Vertical Clock Driver

Ordering number : ENA0692
LV5609LP
Bi-CMOS LSI
For CCD
Vertical Clock Driver
Overview
The LV5609LP is vertical clock driver for CCD.
Functions
• Ternary output ×2ch
• Binary output ×2ch
• SHT output ×1ch
• Output ON resistance : 30Ω typ
Specifications
Absolute Maximum Ratings at Ta = 25°C, VSS = VM = 0V
Parameter
Symbol
Conditions
Maximum supply voltage
VDD max
VH max
VL max
VH-VL max
Allowable power dissipation
Pd max
with specified substrate *
Operating temperature
Topr
Storage temperature
Tstg
* : Specified substrate : 40×50×0.8mm³, glass epoxy four-layer (2S2P) board
Allowable Operating Ratings at Ta = 25°C, VSS = VM = 0V
Parameter
Symbol
Conditions
Supply voltage
CMOS input High voltage
CMOS input Low voltage
VDD
VH
VL
VH-VL
VINH
VINL
Ratings
Unit
6
V
20
V
-10
V
24
V
0.8
W
-20 to +80
°C
-40 to +125
°C
Ratings
Unit
min
typ
max
2.0
3.3
5.5
V
15
17
V
-8.5
-7.5
-4
V
23.5
V
0.8VDD
-0.1
VDD
V
0.4
V
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
32207 MS PC 20060719-S00002 No.A0692-1/8