LV5233H Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – 24ch LED Driver

Ordering number : EN*A1693A
LV5233H
Bi-CMOS IC
24ch LED Driver
Overview
The LV5233H is a semiconductor integrated circuit that incorporates a serial input and serial or parallel output 24-stage
shift register that features a CMOS structure based on Bi-CMOS process technology. The LV5233H also contains an
n-channel CMOS construction high-withstand-voltage, large-current drive 24-stage parallel output driver.
The protection circuit of the output malfunction is built into.
Features
• Serial input and serial or parallel output
• Enable input for output control
• Serial output enables cascade connection
• Low supply current (0.45mA typ. during standby ICC≤0.6mA)
• Serial input/output levels compatible with typical CMOS devices
• High-withstand-voltage LED driver with open drain output
High withstand voltage (VDS < 42V)
• Operating temperature range Ta = -25 to 75°C
High-current drive (IO max = 100mA)
• Output malfunction protection circuit
Reset input pin Thermal protection circuit VCC decrease voltage confirmation
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output voltage
Output current
Allowable power dissipation
Symbol
VCC max
VO max
IO max
Pd max
Operating temperature
Topr
Storage temperature
Tstg
* Specified board : 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Conditions
SVCC
LEDO1 to LEDO24 off
Ta ≤ 25°C *
Ratings
Unit
6
V
42
V
100
mA
1750
mW
-25 to +75
°C
-40 to +125
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O0610 SY/33110 SY No.A1693-1/8