LV5213LP Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – 3ch LED Driver

Ordering number : ENA0183A
LV5213LP
Bi-CMOS LSI
3ch LED Driver
Overview
This LV5213LP is LED driver for cell phones. Each LED driver gets a constant current controlled. The brilliance control
becomes possible by changing the current value that flows to LED by the serial bus control.
LV5213LP can achieve various effects of the illumination of a full-color LED display.
Functions
• Three color LED driver circuits.
• The LED current can be switched independently in 5-bit units (0 to 5mA).
• Independent on/off control of the three LED drivers (independent control of the 3 RGB colors).
• Each LED drive current level can be adjusted independently over the serial bus.
• Miniature package.
• Thermal shutdown circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Supply voltage 1
Supply voltage 2
Allowable power dissipation
VCC max
VDD max
Pd max
Mounted on the specified board *
Maximum input current
Maximum output current
STBY pin voltage
Operating temperature
VINB
IO max
VSTBY
Topr
Storage temperature
Tstg
The specified board *: 50mm × 40mm × 0.8mm glass epoxy (4-layer circuit board).
Ratings
Unit
6.0
V
6.0
V
5.5
W
6.0
V
12.0
mA
6.0
V
-30 to +75
°C
-40 to +125
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O0610 SY/D1405 MS OT 20051201-S00002 No.A0183-1/10