|
LV2700V Datasheet, PDF (1/9 Pages) Sanyo Semicon Device – Spread Spectrum Communications IC | |||
|
Ordering number : EN *5651
Bi-CMOS LSI
LV2700V
Spread Spectrum Communications IC
Preliminary
Overview
The LV2700V provides the reception and transmission
functions necessary for half-duplex communication in
spread-spectrum communications systems.
Features
⢠Frequency conversion is not required.
(direct signal processing at 236 MHz)
⢠Wide spread-spectrum bandwidth (20 MHz)
⢠Sanyo developed system for PN code synchronization
⢠Allows direct primary modulation (FSK and FM) by
data and analog signals. (Maximum data rate: 150 kbps)
⢠Low-voltage operation (2.7 to 5.5 V)
⢠Low power dissipation (36 mW in RX mode)
⢠Band limiting filter (LPF) for data transmission
[RX Block]
⢠Spectrum despreader
⢠Synchronization supplementation and protection
⢠236-MHz PLL
⢠PN code generator (M sequence)
⢠M sequence code length (31 or 63 chips) and tap
switching
⢠FSK (FM) demodulator
⢠Lock detector
Package Dimensions
[LV2700V]
Functions
[TX Block]
⢠Spectrum spreader
⢠Crystal oscillator circuit
⢠PN code generator (M sequence)
⢠M sequence code length (31 or 63 chips) and tap
switching
⢠9.83 MHz PLL
SANYO: SSOP30
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
Pd max
Topr
Tstg
Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Allowable voltage range
Symbol
VCC
VCCop
Conditions
Conditions
Ratings
Unit
6
V
150
mW
â20 to +75
°C
â40 to +125
°C
Ratings
Unit
3
V
2.7 to 5.5
V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
63097HA(OT) No. 5651-1/9
|
▷ |