LV23100V Datasheet, PDF (1/12 Pages) Sanyo Semicon Device – For Portable Audio System 1-chip Tuner IC Incorporating PLL

Ordering number : EN8370B
LV23100V
Bi-CMOS IC
For Portable Audio System
1-chip Tuner IC
Incorporating PLL
Overview
The LV23100V is a one-chip tuner IC incorporating PLL for portable audio system.
Functions
• AM tuner
• FM tuner
• MPX stereo decoder
• PLL frequency synthesizer
Specifications
Maximum Ratings at Ta = 25 °C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
Maximum input voltage
Allowable power dissipation
VCC max
VDD max
VIN1 max
VIN2 max
Pd max
VCC
VDD
CE, CI, CL
XIN
Ta≤70°C
4.0
V
4.0
V
6.0
V
VDD+0.3
V
180
mW
Maximum output voltage
Operating temperature
VO1 max
VO2 max
VO3 max
Topr
DO
XOUT, PD
BO1, BO2, AOUT
6.0
V
VDD+0.3
V
12.0
V
-20 to +70
°C
Storage temperature
Tstg
-40 to +125
°C
Note : This product should be handled with care because the resistance against electrostatic discharge damage is low.
• CCB is a registered trademark of SANYO Electric Co., Ltd.
• CCB is SANYO Semiconductor's original bus format. All bus addresses are managed by SANYO
Semiconductor for this format.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
42308 MS / 31407 MS PC / 63005 MS PC No.8370-1/12