LV2282VA Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – Bi-CMOS IC FM Transmitter IC with Stereo Modulation

Ordering number : ENA0973A
LV2282VA
Bi-CMOS IC
FM Transmitter IC with
Stereo Modulation
Overview
The LV2282VA is an FM Transmitter IC. MPX block makes stereo modulated, composite signal from L and R sound
inputs. RF VCO include FM modulation function. Audio AGC function keeps FM modulation well regulated. PLL
synthesizer determines RF output frequency with I²C or 3-bit parallel control (selectable).
Application
• Portable Memory Player
• Portable HDD Player
• Wireless Headphone
Features
• (Audio)
• (MPX)
• (RF)
• (PLL)
AGC amplifier
Pilot tone system stereo modulation, audio attenuation
VCO, driver amplifier
70 to 110MHz, 100kHz step available, I²C bus control, 3-bit parallel control
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Maximum input voltage
Minimum input voltage
Allowable power dissipation
VCC max
VIN max
VIN min
Pd max
Pin 4, 11, 15
Ta ≤ 85°C, Mounted on a specified board*
Operating temperature
Topr
Storage temperature
Tstg
* Specified board : 114.3mm×76.1mm×1.6mm, glass epoxy circuit board.
Ratings
Unit
5.0
V
VCC+0.3
V
-0.3
V
500
mW
-40 to +85
°C
-55 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D2607 MS 20071211-S00001 / D1207 MS PC No.A0973-1/10