LV0221CS Datasheet, PDF (1/6 Pages) Sanyo Semicon Device – For Optical Pickups Front Monitor OE-IC

Ordering number : ENA1823
LV0221CS
Monolithic Linear IC
For Optical Pickups
Front Monitor OE-IC
Overview
The LV0221CS is a front monitor optoelectronic IC for optical pickups that has a built-in photo diode compatible with
three waveforms. LV0221CS is small size and type CSP packages.
Functions
• PIN photodiode compatible with three wavelengths incorporated.
• Gain adjustment (-6dB to +6dB in 256 steps) through serial communication.
• Amplifier to amplify differential output.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Symbol
VCC
Pd1
Pd2
Operating temperature
Storage temperature
Topr
Tstg
Conditions
Glass epoxy one-side substrate 55mm × 45mm × 0.8mm
Copper foil area (about 80%), Ta=75˚C
Glass epoxy one-side substrate 55mm × 45mm × 0.8mm
Copper foil area (head: about 85% Tail: about 90%), Ta=75˚C
Ratings
Unit
6
V
136
mW
100
mW
-20 to +85
˚C
-40 to +100
˚C
Recommended Operating Conditions at Ta = 25°C
Parameter
Operating supply voltage
Output load capacitance
Output load resistance
Symbol
VCC
CO
ZO
Conditions
min
4.5
12
3
Ratings
typ
5
20
Unit
max
5.5
V
33 pF
kΩ
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
82510 SY 20100803-S00005 No.A1823-1/6