LE25FW418A Datasheet, PDF (1/27 Pages) Sanyo Semicon Device – 4M-bit (512K×8) Serial Flash Memory with High-Density Read Mode

Ordering number : ENA1432
LE25FW418A
CMOS IC
4M-bit (512K×8) Serial Flash Memory
with High-Density Read Mode
Overview
The LE25FW418A is 512K×8bit Serial flash memory by 3.0V single power supply operation, and support serial
peripheral interface (S.P.I.). There are three kinds of erase functions, Small Sector (4K bytes) erase, Sector (64K bytes)
erase and Chip erase. Page program can program the arbitrary data from 1 byte to 256 byte. Program time is high speed,
1.5ms (Typ.). Moreover, The LE25FW418A makes the best use of the feature of the serial flash memory, and is stored in
8pin very small package. The LE25FW418A is best suited for applications that require re-programmable nonvolatile
storage of program memory.
LE25FW418A has also the High-Density read mode (hereafter, HD_READ mode) that is the most high-speed data
transfer in the world as the flash memory with serial interface. About eight times the data-transfer velocity can be achieved
without changing the clock frequency used in a usual serial flash memory by using this mode. For instance, it is possible to
read with 400Mbit/s in the maximum by using the HD_READ mode of 50MHz though a standard serial flash memory read
with 50Mbit/s or less.
Features
• Read/write operations enabled by single 3.0V power supply: 2.7 to 3.6V supply voltage range
• Operating frequency : 50MHz
• Temperature range : 0 to +70°C,-40 to 85°C(Planning)
Continued on next page.
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
61709 SY 20090428-S00004 No.A1432-1/27