LE25FW403A_11 Datasheet, PDF (1/18 Pages) Sanyo Semicon Device – 4M-bit (512K×8) Serial Flash Memory 30MHz SPI Bus

Ordering number : ENA1229B
CMOS IC
LE25FW403A ^{4M-bit (512K×8) Serial Flash Memory}
30MHz SPI Bus
Overview
The LE25FW403A is an onboard programmable flash memory device with a 512K×8-bit configuration. It uses a single
3.0V power supply and supports the serial interface. It has three erase functions depending on the size of memory area in
which the data is to be erased: the chip erase function, the sector (64K bytes) erase function, and a page (256 bytes) erase
function. A page program method is supported for data writing and it can program any amount of data from 1 to 256
bytes. The page program time depends on the number of bytes programmed and the IC provides a high-speed program
time of 1.5ms (typ) when programming 256 bytes at one time. Moreover, equipped with a page write function that allows
anywhere from 1 to 256 bytes of data in a page to be rewritten, this device is optimal for applications that perform small-
scale rewriting.
Features
• Read/write operations enabled by single 3.0V power supply: 2.7 to 3.6V supply voltage range
• Operating frequency : 30MHz
• Temperature range
: 0 to 70°C
• Serial interface
: SPI mode 0, mode 3 supported
• Sector size
: 256 bytes/page sector, 64K bytes/sector
• Page erase, sector erase, chip erase functions
• Page program function (1 to 256 bytes/page), Page write function (1 to 256 bytes/page)
• Hardware protect function (lower 256 pages)
• Hardware reset function
Continued on next page.
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
91411 SY 20081002-S00010/70208 SY IM No.A1229-1/18