|
LC8905V Datasheet, PDF (1/16 Pages) Sanyo Semicon Device – Digital Audio Interface Receiver | |||
|
Ordering number : EN*5237
CMOS LSI
LC8905V
Digital Audio Interface Receiver
Preliminary
Overview
The LC8905V is for use in IEC 958 and EIAJ CP-1201
format data transmission between digital audio equipment.
This LSI is used on the receiving side, and handles
synchronization with the input signal and demodulation of
that signal to a normal format signal.
Features
⢠On-chip PLL circuit synchronizes with the transmitted
IEC 958 and EIAJ CP-1201 format signal.
⢠Provides 128fs, bit, and L/R clock outputs.
⢠System clock can be selected to be either 384fs or 512fs.
⢠Microprocessor interface code settings for different
output types
â Input pin, emphasis output, input bi-phase data
output, and validity flag output settings
â Audio data output format setting
â Channel status output (32-bit output for consumer
products)
â Subcode Q output with CRC flags (80 bits)
⢠Start ID and shortening ID detection for DAT (Digital
Audio Tape recorder) that use subcodes
⢠CMOS, single-voltage power supply
⢠Miniature package: SSOP-24
Package Dimensions
unit: mm
3175A-SSOP24
[LC8905V]
SANYO: SSOP24
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D3095HA (OT) No. 5237-1/16
|
▷ |