LC72F3661 Datasheet, PDF (1/15 Pages) Sanyo Semicon Device – CMOS IC Electronic tuning radio for car audio ETR Controller

Ordering number : EN*A0461A
CMOS IC
LC72F3661 ^{Electronic tuning radio for car audio}
ETR Controller
Overview
The LC72F3661 is a ETR controller with an on-chip one-time PROM for use with the LC723661, 3662, and 3663 mask
versions. Since it has the equivalent electrical performance, pin layout and package as these mask versions, it is ideally
suited for checking program operations, starting the initial shipment of finished products and reducing the switchover
time frame when specifications are changed.
The PROM size is 64Kbytes (32K × 16 bits).
Functions
• ROM
• RAM
• Stack
• Serial I/O
• External interrupts
• Internal interrupts
: Up to 32K steps (32767×16-bits)
The subroutine area holds 4K steps (4,096×16-bits)
: Up to 8K×4-bits (In banks 00 through 7F)
: 32 levels
: Two channels. These circuits can support both 2-wire and 3-wire 8-bit communication
techniques, and can be switched between MSB first and LSB first operation.
One of six internally generated serial transfer clock rates can be selected: 12.5kHz,
37.5kHz, 187.5kHz, 281.25kHz, 375kHz, and 450kHz
: Five interrupt inputs (pins INT0, 1, 4, and 5, and the HOLD pin)
These interrupts can be set to switch between rising and falling edges, although the HOLD
pin only supports falling edge detection.
: Six interrupts ; four internal timer interrupts, and two serial I/O interrupts.
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
92006HKIM No.0461-1/15